Read Online or Download Apple Service Manual - Imac 17-Inch PDF
Similar nonfiction_1 books
Eastman used to be a local American medical professional, author, nationwide lecturer, and reformer. He used to be of Santee Sioux and Anglo-American ancestry. energetic in politics and concerns on American Indian rights, he labored to enhance the lives of youths and based 32 local American chapters of the younger Men's Christian organization (YMCA).
- Bebop jazz piano: the complete guide with CD!
- Cupid Is a Procrastinator
- Reinventing Reference: How Libraries Deliver Value in the Age of Google
- The Pocket Outdoor Survival Guide: The Ultimate Guide for Short-Term Survival
Additional info for Apple Service Manual - Imac 17-Inch
Remove the user access plate. • Remove the bottom housing. • Remove the RJ-11 board • Remove the logic board. 30 - iMac (17-inch Flat Panel) Take Apart Antenna Extension Cable Procedure 1. Remove two screws (1 below) from the thermal interface layer of the bottom housing. 2. Pry up the thermal interface layer to separate it from the bottom housing. Remove the cable from two plastic cable clips (2 below). Replacement Note: Be careful not to pinch the antenna extension cable when replacing it beneath the thermal interface layer; position the cable in the channel cut into the bottom of the thermal extension layer.
Remove the power supply. • Remove the fan. Fan Bracket (under fan) iMac (17-inch Flat Panel) Take Apart - 61 Procedure 1. Remove the four screws connecting the fan bracket to the chassis (Faraday cage). 2. Lift the fan bracket from the chassis. Note: The fan gasket is stuck to the back side of the fan bracket. You must clean the original thermal film from all thermal interface mating surfaces, and reapply thermal paste to the mating surfaces on the thermal pipe. 2. -lbs. Use a torque driver (service tool 076-0899) to ensure that the thermal pipe is firmly mated with the top base.
Optical Drive Door iMac (17-inch Flat Panel) Take Apart - 51 2. Slide the optical door guide off the chassis. 3. Carefully remove the two door springs with a needlenose pliers. 52 - iMac (17-inch Flat Panel) Take Apart Optical Drive Door 4. Remove the door hinge screws. 5. Open the door open. Optical Drive Door iMac (17-inch Flat Panel) Take Apart - 53 6. Slide the door and hinge off the frame. Remove the door from the base. You must clean the original thermal film from all thermal interface mating surfaces, and reapply thermal paste to the mating surfaces on the thermal pipe.
Apple Service Manual - Imac 17-Inch